PowerBomb question.....

I'm hoping someone with an FMF PowerBomb header on a WR/YZ400/426, can tell me the diameter of the 'fat' section of the header. Thanks, Chris.:cry:

I have a SS power bomb on my WR 426. Outside diam is 1.622 in. With my dial gauge just before the mid pipe junction. Same Diam. at the header.

Eric

The header pipe size is roughly 1.6 inches. The FAT part is 2.125" or 53mm. It is 2.75" long, plus .5" on each end to taper back to 1.6, and is about 8" from the exhaust flange at the head, measuring along the pipe center line.

:cry:

i smell a home project

The header pipe size is roughly 1.6 inches. The FAT part is 2.125" or 53mm. It is 2.75" long, plus .5" on each end to taper back to 1.6, and is about 8" from the exhaust flange at the head, measuring along the pipe center line.

:cry:

That's just what I needed grayracer, thanks :cry:

i smell a home project

Yeah, I scored a cheap ($5.00) header on eBay, and i'm gonna have a bit of a play around with it. :cry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now