Jump to content

Devol vs Unabiker vs ??


Recommended Posts

I have had Devol's guards but noticed side impact dings on my 03. So now I have the Unibiker guards for my 05 and they completely cover the sides and offer much more protection and strength. Just look at the rear braces for both units! I would think you could grind or cut a lot of material off to get aftermarket tanks to work and still have plenty of protection. After all were not going to fall down anyway?

Link to comment
Share on other sites

I installed Devol's rad guards on both my 04's. The WR250 was the worst for trying to tighten (let alone insert) the frame upper bolt. The 450 had a little more space to operate in. I had to use a combination screw driver/socket extention to get it done.

Now that they are on I am pleased with the protection, sides and front from what I can see. By the way there is an ebay auction for a set for $20 right now! See http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4519065401&ssPageName=STRK:MEWA:IT

We shall see how they perform.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...