Need a hand, wr400 Magura slave mounting?

ive just bought a new slave cylinder and mount, i suspect the guy i bought the mount off gave me the wrong one, but unfortunately hes in the us and im in aus, so i have the stock mount and what looks like a 426/450 mount, does anyone have any pics of the 400 with a magura mounted? im stucj for ideas on how to mount it properly

thanks - Brett :cry:

cool, so youve used the stock mount? did you have to modify it?

and how did you get the slave to...stick to it? and sit there?

thanks in advance :cry:

cool, so youve used the stock mount? did you have to modify it?

and how did you get the slave to...stick to it? and sit there?

thanks in advance :cry:

DON'T mount the slave too rigid !.....I tried it with a rubber grommit and within 2 weeks of use the end of the slave had ovalised and was leaking !

You need to let the slave move around, or the arc that it describes in use WILL wear it PDQ !:cry:

ok ive had another look and its seems as though im going to need to modify the stock mount, either bend it in a vice or somehting like that

has any one else had to do this?

if i use the stock mount, the stock mount will partially engage the clutch....bad

so any other ideas?? :cry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now