Can anyone tell me how to remeve the impeller from the impeller shaft of a 2003 yz450f
Remove the kick starter , exhaust , clutch cover , and inner cover , unscrew impeller counterclockwise and pull the shaft out
Dont know if it is good or bad but? but when I replaced my seals I used an impact gun and it zipped right off. Not because its on tight, just from the speed of the gun
In general, it's a bad practice to use an impact gun in any situation in which the gears involved will bear the brunt of holding against it. You should always disengage the gears from one another and hold them with a rag, or other means to keep the teeth from being slammed when using these tools.
You need to be a member in order to leave a comment
Sign up for a new account in our community. It's easy!
Already have an account? Sign in here.