question for those with baja kits installed

I took my headlight and signal flasher out a few weeks ago and went to put the flasher back on last night and imagine this, I forgot which way it connected. It has two connectors AND it works connected both ways. Will it eventually fail if connected wrong? What is the proper connection? Thanks.

Chris

Chris,

I don't know if it matters how they are connected but here are the instructions from the manual.

The red wire goes to the terminal labeled"X" and the orange wire goes to the "L" terminal.

I am in the process of installing my second Baja Designs kit.My friend did not trust his own workmanship.

If you need a copy of the installation manual send me your snail mail address and I will copy mine and send it.

[This message has been edited by carverdude (edited 07-06-2001).]

Thanks carver, that's exactly what I needed to know. I bought my bike and had the kit installed as part of a deal at a shop that took care of all the leg work in getting it street legal, sooooooo, I don't have a manual. Thanks again.

chris

Originally posted by carverdude:

Chris,

I don't know if it matters how they are connected but here are the instructions from the manual.

The red wire goes to the terminal labeled"X" and the orange wire goes to the "L" terminal.

I am in the process of installing my second Baja Designs kit.My friend did not trust his own workmanship.

If you need a copy of the installation manual send me your snail mail address and I will copy mine and send it.

[This message has been edited by carverdude (edited 07-06-2001).]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now