Need to find a straight key in stock or exact dimensions so I can build one
Save my weekend please
Thanks for looking made one
I need the dimension too, I´ll build it, I can´t get it here!!!.
You should just measure the original, but I think it is 5mm (square) and 15mm long.
The idea is built the key, because where I live a can´t get it!.
I made my own from keystock that I got at McMaster.com. It was 5mm, but a tiny bit oversize, so I carefully sanded it down a couple thou to get a nice tight fit. If you make one from scratch, be sure you use a quality steel alloy, otherwise you may soon end up right back where you started, with a mashed key.
Don´t you remember the length?
Just built 3 made some extras
they are exactly
.196 square by
these are nice and snug
BUT while I was building these I noticed a crack in my balencer drive gear :D
called my dealer who doesn't have one(of course)
called yamaha in calf. they also do not have any...
(they are on backorder)
If any one can help me please E-mail me
So I am down unless I can find one in stock somewhere.
balencer drive gear part# 5BE-11536-00-00
Straight key part# 90282-05034-00
You need to be a member in order to leave a comment
Sign up for a new account in our community. It's easy!
Already have an account? Sign in here.