HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
brown77

TPS (cant find wire) I have looked for 1hr before posting this

5 posts in this topic

no, the TPS is the wiring that runs to your carb. there is a connector at the carb that connects the TPS to the wiring harness. Unplug it here and cover both ends of the plugs.

Share this post


Link to post
Share on other sites

look on the left side of the carb (shifter side) and you will see the wiring going into the carb. Follow the wires out of the carb about an inch and you will see the connector.

The mod you were looking at is the blue wire mod or nuetral saftey switch disconnect. This was very popular on the 426 bikes and was felt to aid in starting. I have not seen alot of 450 riders do the "blue wire" mod.

Share this post


Link to post
Share on other sites

look on the left side of the carb (shifter side) and you will see the wiring going into the carb. Follow the wires out of the carb about an inch and you will see the connector.

The mod you were looking at is the blue wire mod or nuetral saftey switch disconnect. This was very popular on the 426 bikes and was felt to aid in starting. I have not seen alot of 450 riders do the "blue wire" mod.

thanks alot

:cry:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0