Yoshi Tec Inserts

Has anyone used the Tec Inserts for a Yoshi pipe?

I just purchased the quiet one to quiet down the Yoshi (104 db ouch!!) and it does not seem to fit.

There is no way the end cap can go on with the insert installed.

any info would be appreciated.

Al

hiya Allan,.. If you haven't already figured it out, here's what you do...... take the exposed tip of the insert, and grind off about 1/4 of the lower edge at a 45 degree angle...... then the end cap should fit in place... it worked for me, hope this helps

Paul

hiya Allan,.. If you haven't already figured it out, here's what you do...... take the exposed tip of the insert, and grind off about 1/4 of the lower edge at a 45 degree angle...... then the end cap should fit in place... it worked for me, hope this helps

Paul

Paul, Thanks for the reply.

I called Yoshi, and I have a first generation pipe, which has no inserts or spark arrestors available.

The one I purchased was for a newer pipe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now