Feedback on moriwaki

Anyone have any feedback on moriwaki system? I'm getting ready to spend the money but want to know that it is for a good product. Eye candy is important but performance is more important. Down low to mid is most important. Already uncorked with stock baffle moded to be longer like hrc, 13t sproket and thinkin on gettin edlebrach carb.

go buy it right now! but really, in all honesty, this was the best fit and finish product i put on my bike. the welds are works of art. mine's setup as a motard with a tm40 carb and holes in the airbox. the pipe is actually quieter than the stock exhaust with the drilled out tip. it gave the bike more power everywhere. just make sure you jet to suit as just putting the pipe on will lean the bike some. money well spent in my opinion. good luck!-jeff :)

Just curious about the loudness of the Mori.

Qadson reported that Mori rep's put the pipe at well over 100 decibels...to loud for us Cali dual sporters.

Is that what you have experienced?

:)

If your thinking about the Edelbrock go ahead and get it. You won't regret it. I like the Moriwaki pipe also but I keep hearing how good the stock pipe is. I'm sure the Moriwaki would be lighter but I'm not concerned with weight. If it helped power everywhere then it would be worth it. I'm a little concerened about the how loud it is also. Let us know if you get one.

Just bolted up my Edelbrock last night! :) Trick carb. Thing shiny..bright & shiney make motor go vroom vroom! Me like! :D

Just bolted up my Edelbrock last night! :D Trick carb. Thing shiny..bright & shiney make motor go vroom vroom! Me like! :)

just did mine tonight :D:D :D :usa:

where is the best place to get an edlebrock and how much?

where is the best place to get an edlebrock and how much?

Contact Rob or Denise Barnum of Barnums Pro Products. Rob did R&D for Edelbrock on this carb and other products for Edelbrock and he sells them at a good discount from retail. Rob is also a ThumperTalk partner, professional XR650R racer, pro engine builder, pro suspension tuner, sells aftermarket parts, etc. You can email him at sales@barnumspro.com or call him at (760) 868-8097. He's a great guy to deal with concerning bikes, engines, mods, suspension, exhaust, providing pit support, racing Baja, etc.

if this helps in comparison-my friend's drz400 w/ a full yosh system is by far louder than my xr. putting the spark arrestor back in the moriwaki does quiet it down a hair, but chokes it up a little as well.

where is the best place to get an edlebrock and how much?

Contact Rob or Denise Barnum of Barnums Pro Products. Rob did R&D for Edelbrock on this carb and other products for Edelbrock and he sells them at a good discount from retail. Rob is also a ThumperTalk partner, professional XR650R racer, pro engine builder, pro suspension tuner, sells aftermarket parts, etc. You can email him at sales@barnumspro.com or call him at (760) 868-8097. He's a great guy to deal with concerning bikes, engines, mods, suspension, exhaust, providing pit support, racing Baja, etc.

Barnum's For Your Bikes That Race,

It's Such a Happy Place!

Hap - Hap - Hap - Hap - Happy Place,

It's The Place For Bikes That Race!

:usa::D :D :D :D :usa:

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now