How do you remove the steel pedal tip from the aluminum brake lever arm

It appears riveted in place

The inside is flush to the pedal

The outside of the rivet is inside the pedal tip

It would be tough to grind off the inside, as it is hard to get to

 

Drill it out?

Edited by KRANNIE

It appears riveted in place

The inside is flush to the pedal

The outside of the rivet is inside the pedal tip

It would be tough to grind off the inside, as it is hard to get to

 

Drill it out?

It appears it could either be drilled or ground off from the inside.

What are you replacing it with?

It appears it could either be drilled or ground off from the inside.

 

Yeah the google consensus is to drill it out.

What are you replacing it with?

 

Unicorn teeth.

It looks like you could grind it a ways then punch it out also.

Just don't replace it with alligator teeth.

Edited by stevethe

On my yz250 2 stroke I ground off the steel tip when it got all bashed in. Bought a replacement tip for a Tusk brake pedal and it works good. Been on there quite a while and still solid.

Edited by TN Dirt Rider

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now