Torque specks

[Hypheriox]

Just wondering what the torque on the nut for the back tire should be

[Doc_d]

The make, model and year of the bike would be helpful.

I can tell you that on a Gas Gas 250 TXT Pro Racing trials bike the spec for the axle nut is 36 foot pounds if that helps you at all.e

Edit: your garage shows you have a WR450F. I googled it and found this thread which has some torque specs listed for a 2005 WR450F. Looks like it's 90 ft/lbs for the rear axle nut.

https://www.thumpertalk.com/topic/229194-2005-quick-reference-guide/

Edited June 4, 2016 by Doc_d

[Hypheriox]

03 wr450

[ThrustWasher]

My 03 crf450r is 93 ft lbs

[The428]

Just crank that bitch down til it's good and tight

[BOAB]

Just crank that bitch down til it's good and tight

 

?

[ThrustWasher]

Just crank that bitch down til it's good and tight

excellent way to destroy your bearings.

[ThrustWasher]

Just crank that bitch down til it's good and tight

excellent way to destroy your bearings.

[Hypheriox]

I put it at 90

[Turboloader]

I'm just wondering, what are Torque specks? Perhaps tiny particles from a rusty torque wrench? Mabey the correct word you were searching for is torque specs?  God save the Good Kings English!Just follow your shop manuals specs, and you should be ok......

[BOAB]

excellent way to destroy your bearings.

 

And sleeve.