Small light bar on 2014 yz450f?

I know that these new fuel injected bikes have so many extra amps or watts or whatever it's called to run something through the fuel injection system. How many is it? I'm just wondering if anyone has a small light bar on their yz450f that is just plugged into the efi system. No aftermarket stator or anything like that or a battery. And would I need a wiring harness or just run the wire straight to the plug? I seen a guy that lives near me that had one on his Kx450 that was just plugged into the fuel injection system. Thanks

You have about 40w of available power. You can buy a plug and play lighting setup from BajaDesigns for about $250.

Can anyone tell what is the correct plug/wire where you can get the power?

I know that some people have done that with crf. 

 

Thought that I could order one of these:

http://www.ebay.com/itm/301829731935

I run a 40w spot beam light bar, direct power from where the tuner plugs in and ground to chassis il take some pictures tomorrow, if you search on snow west you can find a few how post on how to do it

Edited by DanielMerrick
ImageUploadedByThumper Talk1456973172.583792.jpg

I run a 80w spot beam light bar, direct power from where the tuner plugs in and ground to chassis il take some pictures tomorrow, if you search on snow west you can find a few how post on how to do it

ImageUploadedByThumper Talk1456973338.712618.jpg

80w? That looks like a 40w unit...

The link you posted in this thread is for a 40w light. The bike wouldn't run if it was 80w...

http://www.thumpertalk.com/topic/1153173-2015-yz450f-wtimbersled-kit/?fromsearch=1

Edited by Monk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now