03 wr450 jetting?

I just installed the james dean kit in my bike. The instructions said to put the clip on the blue needle in the third position. I installed the 170mj. My friend installed the same kit and his instructions said blue needle fourth position. My bike runs fine, I was just wondering why the difference in the instructions. Thanks

Hmm, I just looked at mine and it said 4th position for the standard settings

My instructions the 4th was lined out and 3rd was handwritten in?

My bike runs fine, I was just wondering why the difference in the instructions.

The difference is your instructions say to use the 3rd and your friends say to put it in the 4th :) Sorry I couldn't resist.

I would email James Dean and see, he's on the board a lot.

Hmmm I set myself up for that one :)

If your above 1000 feet or 60 degree's start with 3. Clip 4 is very rich on the bottom (may bog) good luck :)

Red #5 for 60 degrees works better than blue #3 good at 700 feet elevation. :)

Thanks everyone for the info. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now