I have decided to spend my rebate on some suspension adjustments. I want to lower the bike an inch and do it as cheap as possible, so I would like to do it myself. I believe I have the process for lowering the forks with a racetech spacers and spring perch stop and circlcip with a new machined groove. My question is about the shock. I can't seem to find anything on how to lower the shock. Will this require complete dis assembly and have to recharge nitrogen etc. The reason I ask is I saw a youtube video on a ktm shock and it didn't' require compete dis-assmbly. Also would you consider lowering the shock a little bit further since the FX seems a little high in the rear anyways? Any info would be appreciated on how this is done.