Yz seat on 2008 wr

[SurfaceToAir]

I recently put yz seat foam on my 08 WR. Here's some pics of what to expect. The yz seat is narrower up top, which makes it thinner on the sides. I prefer it over the wr seat. The yz tray does not fit and you'll need to trim the yz foam to fit the wr tray. I used a hack saw with metal blade for that. Works a lot better than the electric knife for me. The tray with the foam is the yz one.

Also, the seat I bought off ebay had a rip in the foam, so I repaired it with some home spray insulation.

The pics with the seat cover show the differences between the wr and yz. The cover is for wr, and you can see the black to red lines don't match the contours of the seat. Also, my bike has an msr tank on it, which is bigger than stock (duh) but you can really see the narrowed yz seat difference where it meets the tank, now. Stock tank is more narrow....

Edited April 25, 2015 by SurfaceToAir

[SurfaceToAir]

Here is a pic of the repair. I just used the canned spray foam insulation stuff..sprayed it on, smoothed it out.