2012 WR 450 Bark Busters / Hand guards

[XMXZX]

I have read a few posts on here and it seems that everyone likes the Cyra pro bends.  I am going to order a set for my bike.  Not sure if I should get blue or white.  Does anyone have a pic with them installed on a 12 or newer?  I have the stock pro taper bars are they 7/8"?  Will the ones in the link below have everything I need to install them?  Thanks.

 

http://store.cycraracing.com/ceremo7ba.html

 

[revelc]

I think they are 1 1/8".

Great guards. My Zetas would have folded on some of the hits the Cycras take.

Edited for potato

2014 WRR R.I.Pieces

2012 WR450F ECU, GYTR tuner, Yoshi RS4, MSR rad guards, Cycra Pros, and a growing wish list...

Edited September 9, 2014 by revelc

[torkd14]

Your stock bars are 1-1/8" I have a set of Cycra's on my 2012 and they're awesome. Tried Moose Racing ones and they fell apart in a hurry.

[KennyMc]

I like the triple clamp mounts as opposed the the typical "U" clamp mount. The ones that BRP make that replace the top bar clamps.

[woods-rider]

I like the triple clamp mounts as opposed the the typical "U" clamp mount. The ones that BRP make that replace the top bar clamps.

 

And their threaded bar end inserts.

[080]

I like the triple clamp mounts as opposed the the typical "U" clamp mount. The ones that BRP make that replace the top bar clamps.

How did you make that work around the headlight/computer etc?

[YamaLink]

Hard to go wrong with the Cycras. On so many WR450s in these neck of the woods.

[KennyMc]

How did you make that work around the headlight/computer etc?

I actually have them on my 350EXC not on the WR as of now. There is no interference with the computer or headlight. I can take a picture of them on my bike if you would like.

Edited September 10, 2014 by KennyMc

[080]

I actually have them on my 350EXC not on the WR as of now. There is no interference with the computer or headlight. I can take a picture of them on my bike if you would like.

📎ImageUploadedByThumper Talk1410308214.366908.jpg📎ImageUploadedByThumper Talk1410308214.366908.jpg

 

I haven't seen that style before, I thought you were referring to the ones that bolt to the triple clamp. I can see how those go around, thanks.

[AtomicGeo]

These are white ones on my 2014:

 

 

 

 

[cubera]

Get some open ended DRC grips to go along with those wrap around guards. _? 

Edited September 10, 2014 by cubera

[KennyMc]

_{Get some open ended DRC grips to go along with those wrap around guards. ?} 

Can you type any smaller ?

[cubera]

Can you type any smaller ?

LMAO. Fixed it fur ya.  

[KennyMc]

LMAO. Fixed it fur ya.  

Getting old sucks ?

[cubera]

Getting old sucks ?

Preachin' to the choir brutha!

[XMXZX]

Thanks for all of the replies.  I am going to order them this week.  The ones I posted in the link above are universal and will fit my bike right?  1 1/8" bars.

[KennyMc]

Thanks for all of the replies.  I am going to order them this week.  The ones I posted in the link above are universal and will fit my bike right?  1 1/8" bars.

I noticed the price for that setup is $133 but you will have an additional mount on your handlebars right next to the handlebar clamps.  I would recommend the following:

 

Get the handguards from here for $70.50

http://www.munnracing.com/    look under the CYCRA info.

 

 

Get the BRP handlebar clamps that replace the top clamps you currently have for $69.99 (they also have the handguards for $4 more so you may just want to get the whole deal here)

http://cyclebuy.com/shopping/cycra/handguard_alloy.htm   This way you are not adding any additional clamps to your handlebars.

 

That would be my suggestion, total cost only being ~$7 more but a "cleaner" setup ?

[XMXZX]

I noticed the price for that setup is $133 but you will have an additional mount on your handlebars right next to the handlebar clamps.  I would recommend the following:

 

Get the handguards from here for $70.50

http://www.munnracing.com/    look under the CYCRA info.

 

 

Get the BRP handlebar clamps that replace the top clamps you currently have for $69.99 (they also have the handguards for $4 more so you may just want to get the whole deal here)

http://cyclebuy.com/shopping/cycra/handguard_alloy.htm   This way you are not adding any additional clamps to your handlebars.

 

That would be my suggestion, total cost only being ~$7 more but a "cleaner" setup ?

Kenny -

 

Going to order the setup you suggested.  I think I am just going to get everything from cyclebuy to save on shipping.  Thanks

[KennyMc]

Kenny -

Going to order the setup you suggested. I think I am just going to get everything from cyclebuy to save on shipping. Thanks

They also have the threaded bar ends which I also use. Have them on both my bikes. Makes for a more solid application.

[GP1K]

Another vote for Cycras. I have the triple clamp mounts on my WR, and the BRP top bar clamp/Scotts damper/bark buster mount on my KTM. Both work great, fit great and don't interfere with anything.