will 2012 plastics fit on 2009-2010 wr450's

[aussie_drz400]

I have a 2010 wr450f,  can anyone tell me if 2012 plastics bolt onto the 2009-2010 models ?

[funt]

I think everything but the rad shrouds fits.  The front fender needs 2 holes drilled.  Someone in the big 2012 wr450 thread wired old shrouds to a new tank.  It looked good in the picture.  Maybe it could be rigged?

I popped the necessary parts in an installed a spare set of plastic I had for my 07. The rear fender was identical. 2 of the front fender bolt holes didn't line up, so I filled the existing holes with a hot glue gun and redrilled using the 2012 fender for a template. The rad shrouds were completely different so I simply tied them on with wire.

 

I think someone said the new side covers fit.  Can't find it.

Edited April 8, 2014 by funt

[fixitandy]

I know the side covers fit, if you get the new style YZ front fender you may not have to modify the the holes, ROOSTA out!

[aussie_drz400]

so is it just the fuel tank & seat that need replacing to bolt on the 2012 radiator shrouds ? 

[funt]

I don't know if it fits the frame but a YZ250F tank is made to work with a carb and used the same shrouds.