HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
mikseven

426 Complet Clutch on 400

7 posts in this topic

Hi all,

I'm considering to buy a complete WR426 Clutch (Basket, Center Hub, Pressure Plate, Spring, Push rods, actuator and plates).

 

Is it installable on a WR400?

 

I need to replace my Clutch due to eccessive wear and with the 426 it will be possible to mount the newest Rekluse Products.

 

Thank

Mik

Share this post


Link to post
Share on other sites

Hi mate. Did you end up doing this? I was searching fir an answer for the same question so i can fit a rekluse to my 400.

Hi Rosedog, 

yes, it works.

 

You need to replace entire Clutch with the 426 model. Actuator, primary drive , hub, Friction/Drive Plates, pressure plate and springs.

If you need to install a Rekluse, only actuator, primary drive, Drive/Friction Plates are needed. Pressure plate and spring are not used.

 

If you find a Z-start pro is good enough. A core Exp is better.

Share this post


Link to post
Share on other sites

Cheers mate. I brought a 2002 wr400 as a parts bike has a seized engine. Was just looking to see if the clutch was the same as 2002 426, but i think it is different. As far as i can tell it has 1 less plate and 1 less spring. So will continue to search i think. Thanks for your help.

Edited by rosedog

Share this post


Link to post
Share on other sites

Cheers mate. I brought a 2002 wr400 as a parts bike has a seized engine. Was just looking to see if the clutch was the same as 2002 426, but i think it is different. As far as i can tell it has 1 less plate and 1 less spring. So will continue to search i think. Thanks for your help.

Yes The 400 has a clutch with 5 Springs directly derived from xt & tt series. The parts are completely swappable. If you are lucky you can find a Rekluse z.Start, the 1st version. It works great. I ran some Italian Rally Championship Races without problems.

 

The only advantages of the 426 clutch is that you can use more recent Rekluse Systems.

Share this post


Link to post
Share on other sites

Thanks mate. It seems a bit hard to find info on these bikes now, and alot of blokes font want to share their knowledge. Your a legend

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0