Or sign in with one of these services
Forgot your password?
JokerWR, February 6, 2014
Posted February 6, 2014
Yes, but you'll have to do some trimming and heat gun work to make them fit in certain places. The front/rear fenders are no issue - perfect fit. I didn't use the fork guard graphics but they would have been fine. The tank shrouds require some work but still look good. The number plate and airbox graphics are much different and will need a lot of work; I ended up not using mine because it wouldn't have looked good. Bolt holes and overall shapes are different between the two.
Thanks ... I appreciate the reply ... I can't seem to find any decent graphics for the WR and the ones I have found are way overpriced about 3X that of the YZ.
Have you checked out Decal Works. Their prices aren't that bad.
Have you checked out Decal Works. Their prices aren't that bad
i just checked them out ... thanks but not really diggin them either and you can get a yz kit for 1/2 that on ebay too ... $170 for some stickers just seams kinda crazy to me
Posted February 7, 2014
Which is why I went with the $60 YZ graphics and made them work. Plus, I was intent on red, black, and white graphics and couldn't find any WR-specific ones. That said, the job would be a lot easier if everything just fit and all you had to worry about was squeezing out the bubbles.
You need to be a member in order to leave a comment
Sign up for a new account in our community. It's easy!
Already have an account? Sign in here.