Stator/Rectifier Wiring Help Please

Hello all,

I need some help to get my bike riding again. I bought my 2005 WR450 with the sicass racing street legal kit installed already. After riding at night with the light I noticed my battery would die. I soon found out that I need to do the stator mod and get a new rectifier. I got the stator mod done by a local shop and picked up the rectifier online.

I am not sure what to do at this point to make sure I don't mess anything up. What is the easiest fastest way to do this the right way? Thanks in advance!

I am thinking of just cutting the wires at the stock rectifier and splicing them into the new trailtech rectifier and then hooking all the factory connections back together. There are two factory connections for the stator and two for the stock rectifier.

Will this work? I plan to leave the single wire coming out of the new rectifier unhooked.

I followed the baja designs instructions on the stator and rectifier and now my bike has no power when I hit the power switch? Anyone have an idea?

Start by checking your battery terminals and the fuses.

I sent my stator to Baja Designs and they floated the ground for 20 or 30 bucks. This mod along with their regulator/rectifier allows me to run my HID, dual sport kit and GPS with no problems no problem on my '07.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now