Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.
Please post any bugs you encounter, but before you do, check to see if it's already listed.
Thanks for your patience while we work to improve the community.
So I thought I would start a build for my new 2013 YZ250. I had originally only planned to do the bare minimum when it came to mods, but I can never leave well enough alone.
So here is what I started out with, a brand new 2013 YZ250 that I picked up from Cycle Center in Culpeper, VA.
I took it home and stripped off the stickers I didn't want.
That night I ordered some parts for it. An hour meter, Renthal tall bars, grips, and a 51T sprocket, a blue Acerbis rear fender, Twin Air filters, and a Works Connection glide plate. This is how it currently sits.
I have an 04 YZ250F I just bought. Brand new to riding dirt bikes. What are some good mods to make to the bike. I know about sprockets and lower the the tooth for a better woods ratio. The bike is basically stock besides a tusk clutch it came with.