Jump to content

WR450 Exhaust on a YZ450 ??


Recommended Posts

I just went the other way on my WR . Put a YZ muffler on my WR so I would think it would. The WR muffler hard bolts to the subframe. No rubber bushing like on the YZ. Other than that the bolt layout is the same (at least on the WR). I also just picked up a stock '01 WR exhaust in like new condition on Ebay for $80 for my dual sport. They're out there to be had just gotta keep a sharp eye. If you run the stock WR exhaust get a GYT or one of the other aftermarket inserts as the stock one is a joke (my lawnmower has a bigger exhaust ?)

Link to comment
Share on other sites

I actually just put it on so I haven't had a chance to ride it yet. I did have to fatten up the pilot and raise the needle 1 clip because it was popping out the exhaust after I put it on which I guess is an indication it breathes better. I did it mainly for the weight savings (3+ lbs) and am hoping that there will be some performance gain as well.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...