2008 WRF 450 computer wire question

I am in the process of putting a keyed ignition switch on my 2008 WRF 450, and noticed wires going to the computer that are terminated with the plug shown in the picture. They are 4 wires. Does anyone know what these 4 wires are ( potentially ) for?

thanks!

Dustin

computer wires.jpg

I am in the process of putting a keyed ignition switch on my 2008 WRF 450, and noticed wires going to the computer that are terminated with the plug shown in the picture. They are 4 wires. Does anyone know what these 4 wires are ( potentially ) for?

thanks!

Dustin

I remember seeing a diagram that said it was a coupler, but it didn't say for what unfortunately. Are you planning on doing any sort of write up or is there already one that you're using for the keyed ignition? I'd be interested in seeing it if so.

Excellent! Thank you!. Don't need that, so I am going to scavenge that plug to use for my key switch and just fill the computer wire plug with silicone.

I am going to do a write up on this. I am wiring the bike up for street. I just started digging in last night and am waiting on some parts still. The post will cover the wiring:

* lights

* keyed ignition switch

* turn signal / high low beam/ horn switch

* new starter + kill switch to replace the stock starter and kill

* New light indicators ( signals, ignition, high beam )

I will try to get it all out in one or two updates, so it will be a few days before I post on it.

cheers!

Dustin

Edited by SurfaceToAir

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now