Jump to content

carb question


Recommended Posts

Okay I found my problem needed valve shims actually getting about a ride or two away from reseating valves I plan on after next weekend but having carb issues first thing I notice gas is not going from tank to carb I see because I have a clear hose next is I have gas leaking from my vent hose plz help

Link to comment
Share on other sites

Okay I found my problem needed valve shims actually getting about a ride or two away from reseating valves I plan on after next weekend but having carb issues first thing I notice gas is not going from tank to carb I see because I have a clear hose next is I have gas leaking from my vent hose plz help

bad needle and seat/dirty/ floats could be bad or stuck.

Link to comment
Share on other sites

  • 3 weeks later...

if your needle and seat look dull or dirty, try carb cleaner and a cotton swab first, if it still looks grungy at all, take some regular toothpaste and a cotton swab and polish the seat and order a new needle. the toothpaste will act as a mild abrasive and polish the soft brass seat.

best of luck!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...