2010 YZ450 No Spark


2 replies to this topic
  • MarkDan

Posted January 12, 2013 - 06:49 PM

#1

Hi I have a 2010 yz450 that i had torn down to have the frame welded. The only thing left on the frame was the foot peg brackets. Now that it is back together it wont start and doesn't have any spark. I have gone through most of the electrical conections, and tested their resistance which were all within spec. I'm at a loss for what to do now. Any help is apreciated.

It started fine before i tore it down.

Edited by MarkDan, January 12, 2013 - 06:50 PM.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DC_Excitement

Posted January 13, 2013 - 08:20 AM

#2

check all of the wire conncetion terminals for proper tension

  • MarkDan

Posted January 13, 2013 - 01:53 PM

#3

Took all of the electrical off, and looked over everything then put it back on, and it fired up on the first kick. I guess it was just a loose conection somewhere. Thanks for the advise.





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.