2012 YZ450F sag question

7 replies to this topic
  • atrdrvr7

Posted January 07, 2013 - 05:54 PM


Hi guys. I just picked up a used 12' yz450f. I also picked up the Dubach engine relocation kit. I'm planning on installing it tomorrow. I called Dubach this afternoon and asked about setup after the kit is in place. They said to run sag at 104-105 mm. Also asked about fork height. They said anywhere form 0-5 mm in the clamps. Just wanted to know what guys with the kit are running. Also any other setup tips for this bike. I ride all MX, vet intermediate. I also set all the clickers back to the factory specs. I also searched but could not find anything that was specific to the 12'. Any help would be greatly appreciated.

  • luvnoldcars

Posted January 07, 2013 - 06:25 PM


I run forks flush and 98 to 100 mm of sag on indoor tracks. Forks 5mm up and 104 mm sag on outdoor tracks. Drd relocation kit and 5.3 rear spring are the only things that aren't stock on my bike

  • luvnoldcars

Posted January 07, 2013 - 06:26 PM


Mines also a 2012

  • asnyder2

Posted January 08, 2013 - 06:43 AM


When people are saying flush, are you all meaning flush with outer fork tube or entire fork flush ( inner chamber cap) flat with top of clamp? I was thinking about this very subject myself this weekend.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • luvnoldcars

Posted January 08, 2013 - 07:36 AM


Flush with the outer tube

  • asnyder2

Posted January 08, 2013 - 08:18 AM


Thanks, that what I thought.

  • atrdrvr7

Posted January 08, 2013 - 11:43 AM


Thanks luvnoldcars.

  • motomike1000

Posted April 01, 2013 - 01:19 PM


Tell me about the change the kit made to the bike,thanks mike

Related Content


2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Wilson the Blue Privateer by jetfuel

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.