Rear hub for yamaha yz450f

2 replies to this topic
  • mxracer733

Posted December 31, 2012 - 11:01 AM


I have a 2006 yamaha yz450f and i blow out the rear hub. I found a sweet set of black rims off a 2009 yamaha yz450f. looked up part numbers and they are not the same. can they work with a little modifacation? thanks, Mike

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DC_Excitement

Posted December 31, 2012 - 12:23 PM


i believe in 09 the rear axel is bigger in diameter. you would need to use the 09 axel with the 09 wheels, but the axle wont fit through the swingarm. im not shure if you can use an 09 swingarm with the 06, but i bet you can

  • grayracer513

Posted January 02, 2013 - 12:02 PM


The simple answer is that the '09 won't fit. There is no practical way to adapt it to an older bike other than change the swing arm to match.

Related Content


The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Wilson the Blue Privateer by jetfuel

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.