SIDE STAND SWITCH HELP!!!!!!!!!!!



1 reply to this topic
  • REMOTARD

Posted November 17, 2003 - 04:17 PM

#1

I need to remove my sidestand switch and I noticed that there are 3 wires, 2 green 1 black. One of the wires goes to a diode? Can anyone tell me which wires need to go together to bypass the switch. What does the diode do??? I dont want any problems later on if the diode burns out... Thanks in advance for taking the time to help me out.. :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MotoChris521

Posted November 18, 2003 - 06:41 AM

#2

You didn't say which bike you have,but on my 03650L i connected the green and the green white wires and left the white /black wire disconnected.I'm not sure about the diode,but diodes basically only allow current flow in one direction and if it's not connected there wont be any current. :)





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.