Hammer Head axel block problem


3 replies to this topic
  • slygary

Posted December 07, 2012 - 02:21 AM

#1

I got myself a set of Hammer Head axel blocks for my 2012 YZ450 and the right hand block seems to be too thick, i cant get the nut to thread on enough. The Hammer Head block is 4.5mm (3/16") thicker than the origional. Has anybody else had this problem ? I hope the picks below can explain.
Thickness comparison.
Posted Image
With origional washer and nut.
Posted Image
Posted Image
With a nylon washer that i made.
Posted Image
Posted Image

  • Chazmagnum

Posted December 07, 2012 - 08:29 AM

#2

Those are wrong part. I have the same ones and they are only 9.5mm thick total.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Chazmagnum

Posted December 07, 2012 - 08:42 AM

#3

Posted Image
What it should look like.

Edited by Chazmagnum, December 07, 2012 - 08:43 AM.


  • slygary

Posted December 09, 2012 - 12:55 AM

#4

I checked the package it came in and it was marked for a 2010-2012 YZ450 so something went wrong at the hammerhead factory.Im gonna take it to work and get one of the guys in maintenance to machine it down.





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.