Using/Losing Water


2 replies to this topic
  • stev0

Posted November 03, 2012 - 05:42 AM

#1

Just picked up a 426 and it seems to be pushing out water on the over flow on the radiator while riding or idling.

Does anybody know what could cause this?

Motor has just been recently rebuilt and I had to throw on new rings due to it overheating a month ago.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • niles

Posted November 03, 2012 - 06:05 PM

#2

Needs a new rad cap.

  • jojo1224

Posted November 03, 2012 - 06:25 PM

#3

Do you notice any smoking or antifreeze smell from the exhaust? Remove the rad cap and kick the bike over (you can start it but don't need to) if you see bubbles its a head gasket or cracked cylinder, most likely the first one though.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.