2012 Wr450 RPM ISSUES

No replies to this topic
  • Menzies450

Posted October 10, 2012 - 06:59 PM


hello all just have a small problem i just did the last step in un corking my 2012 WR450 by power tuning the new ECU to the FMF[color="#282828"] POWERCORE 4 map Fi setting. the problem that i ran into was while i have my clutch pulled all the way in and give it a shot of throttle i Notice that bike would continue to rev at a very hight RPM until i release the clutch. just wondering what would cause this and i know its not a stuck throttle.

and also when i did my bike i did my buddies bike of the same model and his bike ran perfect

Menzies 450[/color]


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.