Front Axle Question


4 replies to this topic
  • XR250rdr

Posted September 20, 2012 - 10:55 PM

#1

Can someone who has their front wheel off do me a favor and measure the front axle?

Large diameter straight section: diameter and length
Small diameter straight section: length

I'm trying to find a donor axle for a wheel swap and I think a WR axle may work for me. I just don't want to buy an axle unless I'm reasonably suspicious that it will fit.

I'm trying to run a mechanical speedo, well an enduro computer actually, on my CR500.

Edited by XR250rdr, September 20, 2012 - 10:58 PM.


  • MANIAC998

Posted September 22, 2012 - 11:38 AM

#2

'06 WR450 front axle size: Large end-24.85mm diameter / 45.83mm lengt
Small end-19.85mm diameter/ 163mm length
Maniac

Edited by MANIAC998, September 22, 2012 - 11:40 AM.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • XR250rdr

Posted September 22, 2012 - 02:29 PM

#3

Sweet, thank you very much.

Does the 163mm length include the threaded section?

  • MANIAC998

Posted September 22, 2012 - 05:11 PM

#4

No, the 163mm section is without the threads.
Maniac

  • XR250rdr

Posted September 22, 2012 - 07:21 PM

#5

Thanks

Looks like its not quite long enough. Same problem I have with the CRF axle. I guess I will modify the stock axle.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.