Installed wr stator/flywheel now won't start plz help!


1 reply to this topic
  • rknaub

Posted August 28, 2012 - 06:28 PM

#1

Laid the bike on its right side after removing seat, tank, shrouds, etc... Pulled stock stator/flywheel, installed wr stator/flywheel, buttoned back up. Cut pink wire and grounded the connector side to the frame. Bike wont start. Any ideas?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • rknaub

Posted August 28, 2012 - 07:02 PM

#2

There's another wire harness next the the one going to the CDI, possibly another 6pin. Looks like it came apart. Started first kick after snugging it up. But now the trail tech tach is even worse! Almost 20k rpm?!? Lol. Minor issue.





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

BIGBORE FOR YZ450F 2006? by Taattie94


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.