WR 426 stator going in my YZ

No replies to this topic
  • rknaub

Posted August 20, 2012 - 05:41 PM


I have done a lot of reading, especially http://www.thumperta...21#entry9517821 , my question is probably stupid but I just want to make sure I got this right...

I got a used 2000 yz426, already converted to dual sport but the battery dies after a while on whatever stator the guy i bought it from installed. It's probably not factory stator because he gave me the factory one when I bought it. I'm getting the WR426 stator and flywheel (somehow... Come on eBay! Or anyone got one for sale?), I understand floating the ground and cutting the pink wire... But the AC regulator part... My bike has what appears to be a trail tech reg/rec on it, I can see the two yellow wires coming from my current stator being fed into the reg/rec... I'm pretty sure everything is DC at this point, including headlight, since it works when the bike is not running. All I need to do is install the WR stator and flywheel, using my existing bolts, and float the ground like described in the above link? Run the yellow wires to my reg/rec just like they are now?

Sorry to revive an old stickied topic, just wanna make sure I got it right before I drop $350 on this stuff.


Related Content


Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Should I buy this bike? help....... by Numsa Hul

Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.