06 fresh rebuilt


No replies to this topic
  • sandrider306

Posted August 16, 2012 - 06:53 PM

#1

Hey I fiannly got my bike back together I fired it up and it has this tick I thought my valves were in spec but I have a set of hot cams would loose valves or tight ones be causing this noise the head and all the valve train is brand new and I used the old lifters and shiism from my old head hot cams says .15mm for intake .20mm for exhaust while the yamii manual says .10-.15mm for intake .20mm-.25 and since I ran it already to start breaking it in did I damage the top end thanks for all the input





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.