99 WR400 questions...


4 replies to this topic
  • redswr

Posted July 30, 2012 - 12:09 PM

#1

Hey guys i bet you don't remember but i had a build thread over a year ago, well i finally got it all the way together but it's leaking fluids. On the left side where the oil line goes down the frame theres some sort of vent (little 90* elbow) What is that for? Is there a line supposed to come from there and go somewhere? I looked and the top of the valve cover has a hose missing too but i don't think they connect... i can get pics if ya need them. Heres the bike before and after :)
Posted Image

Posted Image

Edited by redswr, July 30, 2012 - 12:12 PM.


  • MANIAC998

Posted July 30, 2012 - 04:12 PM

#2

The valve cover hose doesn't connect to anything, just as you suspected. It just vents to outside air, down near the shifting lever. As for the other one, I guess I'm going to need a pic, because I can't figure out where it is from my memory.
Maniac

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • redswr

Posted July 30, 2012 - 05:20 PM

#3

heres the 2 spots:
Posted Image
Posted Image

  • MANIAC998

Posted July 30, 2012 - 05:32 PM

#4

Yes, those two spigots connect together with a short hose.
Maniac

  • redswr

Posted July 30, 2012 - 05:40 PM

#5

Yes, those two spigots connect together with a short hose.
Maniac

nice i'll see if i got one laying around :)




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.