WR450F key start


No replies to this topic
  • chriscasha

Posted July 24, 2012 - 04:32 PM

#1

Hey,

I know there are plenty of forums so don't say use the search button. My problem is different.

I have the button switch (on/off) and I have the keyed ignition from the factory (yamaha genuine one that comes from the factory). They both have these plugs on the end except the one going to the switch button doesn't have the black connector.

Posted Image
(not my picture though lol)

Anyway so the button start has the white connector and then the keyed ignition has both of these.

My question is, how am I suppose to switch these out? I am not sure where this black connector goes into the bike as I don't have the schematics of the bike.

Any help would be appreciated.

Thanks,

Chris.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.