06 Yz 450

No replies to this topic
  • sandrider306

Posted July 17, 2012 - 09:21 PM


Hey guys update on my 06 well it's defiantly turned into a project well pretty much I have a brand new top end from the head and valves to the cylinder and cams and cam chain. Well I started on the bottom end and this my problem my clutch is in bad shape basket has groves from the clutch plates the inner hub has groves from the springs so I need a whole new clutch, then come to find out the main crank bearings are going bad and the oil drain plug on the left side case by the rotor is stripped my question is should I trust this 08 bottom end on eBay for 600 bucks without the clutch or should I since the whole top end is new just redo the whole thing with all new parts I bought the bike with a seized motor for 1200 any and all help is greatly appreciated I'm somewhat decent mechanicaly just having a hard time to decide what to do thanks guys

Related Content


First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.