Anyone have the stock shim stack for the shock?  I have one that is been revalved and looks way off from what the stock should be.  I'm trying to get a baseline for what it was.

Edited by MIllerman, 15 June 2012 - 03:34 PM.

MIllerman, on 15 June 2012 - 12:14 PM, said:

I would try calling the dealer.

Unfortunately the dealer doesn't have this info available.  They will have the wear parts and such, but not individual shim stacks.  I have a friend with a similar year stock low hour CR500 that needs a shock fluid change.  I might have to just look at that shock to get an idea of what it might have.

thanks for the help though.

MIllerman, on 15 June 2012 - 12:14 PM, said:

Dug thru my old notes and although not 100% I think this is it.....

Reb
30X24-4
30X19
30X22
30X26
30X28
30X30-2
30X34-3
PISTON
COMP
15X38-8
15X30
10X23
30X38-2
30X34-2
30X30
30X26
30X22-2
BASE

doc

Thanks Doc, you saved me a lot of headache.

It's amazing what a previous person did to the stack.  There were shims cut to look like stop signs and other weird variations.  It also only had about half of the shims left.

Millerman

Edited by MIllerman, 18 June 2012 - 05:57 AM.