yz250f torque specs


1 reply to this topic
  • eagleeyes221

Posted June 08, 2012 - 08:11 AM

#1

im working on my buddys 04 yz250f and i need a few towque specs specifically the ones for his tripple clamps and steering stem ring nut, but if anyone can find an entire spec sheet for the bike that would be amazing. i did find a spec sheet for an 02 yz250 but i dont know if the torque specs are the same for what i need. some help would be greatly appreciated.

  • Swede73

Posted June 08, 2012 - 03:08 PM

#2

If the bolt snaps you went too far.

Bottom Stem nut is 5.1ft.lbs
Top nut is 105ft lbs
Triple clamp pinch bolts are (upper) 17ft lbs (lower) 14ft lbs

This is for an 04 WR so it had smaller forks that year but it should be pretty close




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.