Is there a kit that contains all of the bearings in the bottom end or do I need to pick through the parts diagrams.

There is not a bearing kit that I am aware of, other than crank bearings. Got to pick through the honda diagrams. Why are you replacing all the bearings? Unless you had a catastrophic failure in the transmission side, the bearings should all be fine. Spin them. If they are rough, replace them, other than that re-use them.

Thanks for the info. The lower rod bearing came a part. There are a few gouges in the case but other than that.....The tranny side is OK as far as shrapnal is concerned, but after 6 years(3 of them with my teen age son desert racing) I thought it would be best to do all the bearings and other worn items.

Dave

You can replace all the bearings if you want to. If just doing it for precaution, I would replace the two high load bearings. The big mainshaft bearing right behind the clutch and the countershaft bearing right behind the sprocket.