1982 xl500 with a miss


4 replies to this topic
  • soupbone1969

Posted 20 May 2012 - 04:10 AM

#1

Ok need some help. I picked up a clean 1982 xl 500 got it road ready. Now that i have put a few miles on it i have got a miss in the motor. I have cleaned the carb adjusted the valves. The miss seems to happen half throttle and above it does it cold or hot and not all of the time. Any Ideas

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • seehogs

Posted 20 May 2012 - 06:13 AM

#2

Plug, plug cap, primary wire to plug cap, coil.
Or if you are unlucky, the cdi or stator.

  • soupbone1969

Posted 20 May 2012 - 09:45 AM

#3

I put new plug in it with correct gap.

  • gialinn

Posted 04 June 2012 - 11:01 AM

#4

Some of these older honda's had a resister in the cap that goes on the spark plug. If You've eliminated everything else, the trick is to take the resiter out and replace with a small spring. Sounds like main jet or float level they can be picky about that.

  • soupbone1969

Posted 06 June 2012 - 04:51 AM

#5

Well got the miss fixed put new coil on and when i was under the tank i found some bare wires, Thanks for all the help.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.
Register Close

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!