gearing up for woods 13-14t front sprocket
Posted 09 May 2012 - 09:23 AM
Posted 09 May 2012 - 10:10 AM
That would bit tall for my riding with my setup, I'm running 13/50 or sometimes 13/49.
what's your rear sprocket?
Posted 09 May 2012 - 10:17 AM
Posted 09 May 2012 - 12:17 PM
Posted 09 May 2012 - 12:58 PM
Posted 09 May 2012 - 08:24 PM
Edited by mynewcr250, 09 May 2012 - 08:26 PM.
Posted 10 May 2012 - 03:32 PM
Posted 11 May 2012 - 07:47 AM
Adding 1 tooth on the front = 3.5 smaller on the rear.
If it were me I'd be thinking about 14/51 or 52, you will pull the gear longer, save your SA buffer from wearing as quickly and get better rear suspension action. The larger sprocket makes it work better as the SA doesn't come into play as quickly.
orings work fine, that's all I have ever run and I've never had issues with them rubbing. Been running RK's lately as that's what I've had kicking around. Other chains work too. A tiny groove (worst case senario) in the case will not slow you down but I have yet to see it on my CR250's.
Posted 16 May 2012 - 12:51 AM
That is what I would do if I was going after what you are, instead of going up a tooth on the front. .02$
Posted 16 May 2012 - 07:26 PM
Posted 17 May 2012 - 05:30 AM
I ride flowing woods ...ill post a vid !
Posted 17 May 2012 - 05:37 AM
this is like what i ride ! ( no this is not me or my bike, credit to J-Day racing, this is not my video)
I want to be able to come out of a corner in 2nd and not have it wind out so fast to get more traction
Posted 17 May 2012 - 09:15 AM
Posted 19 May 2012 - 05:35 PM
Posted 20 May 2012 - 11:35 AM