WR/YZ conversion

2 replies to this topic
  • SCOTT123

Posted September 08, 2001 - 04:36 AM


Hate to bother you guys again 'cause I'm sure it's been posted here before...I just can't find it. Any way, I live in Florida, have a 2001 WR426 that's been converted to YZ specs (exaust cam advanced one tooth) and now need to jet it. If someone could please give me the the complete jetting specs it would be greatly appreciated. I need to know the pilot size, jet needle number and clip position, (is the needle jet the same?),main jet size, and fuel mixture screw (turns out). Thanks in advance, Scott

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • sirthumpalot

Posted September 08, 2001 - 09:27 PM


Here are the specs from my 01' manual. I'm sure that this is more than what you need but I put it all there just in case:

Main - #162
Air jet - #200
Needle - OBEJP
clip pos - 4
cutaway (slide) - 1.5
Pilot jet - #42
Pilot air jet - #100
pilot outlet - 0.9
pilot screw - About 1.25 turns (different for every bike)
bypass - 1.0
valve seat size - 3.8
starter jet - #72
float height - 8mm
idle speed - 1700-1900rpm
intake vacuum - 220-260mmHg

[This message has been edited by sirthumpalot (edited September 08, 2001).]


Posted September 10, 2001 - 06:56 PM



You are in the wrong forum, Goto the WR forum and you will find the data you need, great people there. I plan on doing the YZ timing mod when I get my jetting parts. Good luck.


Related Content


Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

Should I buy this bike? help....... by Numsa Hul

Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.