fork tube size?


5 replies to this topic
  • Zakrad_u

Posted May 03, 2012 - 10:39 AM

#1

What size driver do I need to do the fork seals on my 09 yz450?

  • kan3

Posted May 03, 2012 - 11:03 AM

#2

48

I'm not sure if there is a difference but some drivers like the racetech advertise both 47-48. If you buy one of these you'll be able to do almost all modern showa/kyb forks which is nice.

  • lumpy790

Posted May 03, 2012 - 11:38 AM

#3

Plus the other 2 special tools.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ekulb14

Posted May 03, 2012 - 12:40 PM

#4

if you are looking for a cheap way out a piece of PVC cut in half will do the job just fine.

  • jjhubbard15

Posted May 03, 2012 - 12:52 PM

#5

if you dont have calipers to measure the tube then you dont have calipers to check clearances on the bushings, more tools needed than a driver

  • Sheriff245

Posted May 03, 2012 - 12:56 PM

#6

if you are looking for a cheap way out a piece of PVC cut in half will do the job just fine.


This. They work great and cost almost nothing.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.