KX65 FORK OIL

Started by COAL RUN , May 02 2012 07:48 AM

3 replies to this topic

  • COAL RUN

Posted 02 May 2012 - 07:48 AM

#1

Replacing the fork seals on an 08 KX 65 using 7WT oil  for 60+ lbs woods rider, wundering if setting the oil level at 125mm from the top (fork collapsed spring removed) would be the correct level?
Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

  • Smacaroni

Posted 02 May 2012 - 10:24 AM

#2

Seems a little high to me, it's much easier to add more than remove it after, I'd go for 5.5" or 140mm

  • shortyr6

Posted 04 May 2012 - 03:58 AM

#3

I dont know what the manual says, but yes....forks collapsed and spring removed.

  • COAL RUN

Posted 11 May 2012 - 05:02 AM

#4

I ended up going 130mm from the top per the "Team Green" site & it seem to be working pretty well so far with the 7wt oil.
Back to Mini/Pee-Wee


  1. ThumperTalk
  2. Dirt Bike
  3. Special Interest Forums
  4. Mini/Pee-Wee
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.
Register Close

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!