Howdy,

Recentyl bought a 2006 KLX 250, trailered it home and now need the seals replaced, tried the cleaning tricks. I have one of the forks off and unscrewed the cap to reveal the spring and dump out oil, but can't get any further in disassembling. I  turned that screw on the bottom a thousand times to the left and still nothing, do I need to remove that allen bolt down there? I can't find any stores that sell an allen wrench that large if so.. Anyone that has any knowledge or experience on this would be appreciated greatly!

Thanks

Shop manual... theres several postings on the site for free downloads..

Arkvard - you need to remove the fork from the triples.  Turn it upside down and reveal the socket drive - IIRC 14mm.  Use an airgun to remove the entire base valve from the bottom.  Only way to break it loose as far as I know.