cylinder differance 426 & 450

No replies to this topic
  • potman1980

Posted April 19, 2012 - 12:41 PM


hi there everyone,

i'm intersted in boring out my bike to 450 and wondering if anyone has any information about the differance between the 426 and 450 cylinders. i know a 450 has a 63.4mm stroke compared to the 60.1mm of the 426, but i'm not sure if the cylinder wall is thicker or not. i have seen 98mm pistons on the web for the 450, but i'm a little confused as to weather you can bore out the 450 0r 426 cylinder or is there a big bore one on the market i can buy.

hope someone can help.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.