2010 engine porting

2 replies to this topic
  • yamaha605

Posted April 16, 2012 - 02:22 PM


I own a 2010 yz450. I am thinking about doing engine mods. Want to get the most out of it i can. Who has had this work done and who done it for you. And are you satisfied with the power. Im wanting to kind of boost the bottom to mid range of the bike

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • geshields

Posted April 16, 2012 - 04:30 PM


Didn't have the head ported exactly. Bought the GYTR head. Overall, can't say it added any more on the bottom end of the power range by itself. It seems to have helped the mid and top part of the RPM range. Just keeps pulling and pulling. I would say adding a high compression piston helps more with the low end. Put them both together and it screams!!

  • galligar

Posted April 18, 2012 - 08:20 PM


gtyr head with 13.5 piston or( 14:1 which I have) ,both are strong ,the 14:1 with crower cams is my current setup.The crower cams are stronger off the bottom &middle,gtyr cams upper middle and top.I've run both cams and like the crowers better all round,on tight tracks the gtyr cams are hard to manage if your not careful which I'm not.Sandy outdoor track it's a toss-up.If you like a hit,14:1 piston& gtyr cams,the 13.5 piston you can sort of run pump gas if you want, not as hard of hit in the upper middle.

Related Content


100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies

First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

Need help by Goforaride

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  68 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.