no spark 2001 426 on the roads lights etc


No replies to this topic
  • bluesbiker

Posted April 04, 2012 - 07:38 AM

#1

posted elswhere just clutching at straws any help appreciated regards peter
[color=#282828]

i did these tests today pls bear with me spelling etc
ignition system primary coil resistance allowance is 0.20 to 0.30 ohms
my reading0.4 which will translate to 0.40 this is ok i think

secondary coil resistance ,,allowance is 9.5 to 14.3
mine was 10.9 this is ok

cdi magneto inspection pick up coil resistance allowancw is 248 to 372 ohms
mine was 275, again this is ok

ignition system source coil resistance allowance is 640 to 960
mine was 766 again this is ok

source coil 2 resistance allowance 464 to 696 ohms
mine was 555 again ok
disconected the black white wire from cdi unit to remove both neautral and kill switch but still theres no spark,,theres always ben a black wire not connected and when i connect the black white from cdi to switches wire i get 1 spark
any clues pls[/color]




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.